Operation Safety Specification And Accident Prevention Strategy of Rotary Drilling Rig

Rotary drilling rig is a common equipment in construction, the safety of operation process is very important. Improper operation not only endangers the life safety of construction personnel, but also may lead to project delay. To master the operation safety standard of rotary drilling rig and prevent accidents is the key to ensure the smooth construction. Here are the key points.

1. Comprehensive inspection before operation: careful inspection of various components of rotary drilling rig, such as wire rope, drill pipe, hydraulic system, etc., to ensure no damage and no fault. At the same time, check the working site, clean up obstacles, ensure that the site is smooth and solid, and avoid drilling rig tilt or collapse.

2. Correct starting and preheating: Before starting the rig, make sure that all control switches are in the correct position. After starting, let the rig run at a low speed for a period of time to preheat, so that each component reaches a good working state and avoids component damage due to too low temperature.

3. Standardize drilling operation: During drilling, the drilling speed and pressure should be adjusted reasonably according to the geological conditions to avoid forced drilling. At the same time, pay close attention to the operation of the rig, such as abnormal vibration, sound, etc., should immediately stop drilling and find out the cause.

4. Lifting and lowering the drilling tool: when lifting and lowering the drilling tool, the speed should be uniform to avoid emergency stop and start. At the same time, it is necessary to ensure that the drill tool is firmly connected to the rig to prevent the drill tool from falling and hurting people.

5. Multi-person cooperation: When multi-person cooperation is carried out, clear command personnel and establish an effective communication mechanism to ensure accurate information transmission. Operators should follow instructions to avoid accidents caused by miscommunication.

6. Proper parking after operation: After the end of the operation, park the rig in a safe position, turn off the power, and clean the soil and debris on the surface of the rig. At the same time, routine maintenance of the rig is carried out to prepare for the next operation.

Strict compliance with the operation safety specifications of rotary drilling RIGS and the implementation of accident prevention strategies can greatly reduce the risk of accidents, create a safe construction environment, and help the smooth progress of construction projects.