Views: 0 Author: Site Editor Publish Time: 2025-04-03 Origin: Site
Rotary drilling rig plays an important role in construction, but because of its complex operating environment and professional equipment operation, construction safety can not be ignored. Once an accident occurs, it will not only endanger the life of the operator, but also seriously affect the progress of the project. Below, I will introduce the 10 life-saving rules of rotary drilling rig construction.
1. Strictly carry out equipment inspection: Before each construction, it is necessary to conduct a comprehensive inspection of the various components of the rotary drilling rig, such as drill pipe, wire rope, brake system, etc., to eliminate safety hazards in time. After the construction, it is also necessary to check the status of the equipment, do a good job of maintenance, and ensure the safety of the next operation.
2. Wear protective equipment correctly: helmets, safety shoes, reflective vests and other personal protective equipment are indispensable, they can protect your life at a critical moment. In particular, it is strictly prohibited to wear shoes that do not meet the requirements such as slippers and sandals.
3. Set up construction safety area: Around the operation range of rotary drilling rig, clear warning signs and protective fences should be set up to prohibit irrelevant personnel from entering and avoid accidents caused by equipment operation.
4. Standard operation process: start, run and stop rotary drilling rig in strict accordance with the operating procedures to eliminate illegal operations. During the drilling process, pay close attention to the operating status of the equipment, and stop the machine immediately if any exception is found.
5. Pay attention to the safety of electricity: ensure that the electrical equipment is well grounded to prevent leakage and injury. The wire shall not be pulled randomly, and the damage should be replaced in time to avoid safety accidents caused by electrical faults.
6. Stop operation in bad weather: in case of heavy rain, strong wind and other bad weather, it is necessary to stop the operation of rotary drilling rig and transfer the equipment to a safe area to avoid the danger of equipment overturning.
The construction safety of rotary drilling rig is related to the life and health of each operator, as well as the smooth progress of the whole project. Strictly abide by these 10 rules of life preservation is the key to achieve safe construction, and I hope every construction worker can be safe.